Beschreibung
Within this work, an attempt is made to manufacture a loudspeaker in silicon. To increase the radiated sound, an array of reversibly driven microphones was operated in parallel. The system used was a parallel plate condenser with a movable membrane and an acoustic transparent stator. The Coulomb force causes a deflection of the membrane, according to the applied audio signal voltage. The maximum deflection of the membrane is limited by the air-gap between membrane and stator. Since the achievable sound pressure is mainly dependent on the displaced air volume, it is vital to increase the air-gap. To achieve this goal, a transducer with a stress-induced static displacement of the stator was invented. With a similar amount of process steps, compared to the Infineon silicon microphone manufacturing systems those transducers are processed flat until the release etch. After this last step, a stress layer causes the whole stator to perform a static out-of-plane deflection which increases the available air-gap. The center deflection is increased to values up to 133 µm and a volume increase by factor 25 for chips with the same area. Parameters influencing the buckling of the stator have been determined by finite element simulations in the forefield. Novel test structures and various speaker variants are used to validate and optimize the system.
Herstellerkennzeichnung:
Shaker Verlag GmbH
Am Langen Graben 15a
52353 Düren
DE
E-Mail: info@shaker.de
